Τεχνικό φυλλάδιο
Προδιαγραφές
Product Type
Fibre Optic Adapter
Connector Type
LC to LC
Single/Multimode
Multimode
Simplex/Duplex
Duplex
Colour
Beige
Insertion Loss
0.3dB
Housing Material
Polybutylene Terephthalate
Connector Type A
LC
Connector Type B
LC
Height
9.3mm
Depth
35mm
Standards/Approvals
RoHS, GR-326 Core Issue 4, IEC 61754, IEC 61753-1
Width
15mm
Series
HT-DS-FIBRE-ADAPTORS-R10
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
This fibre optic adaptor connects two LC multimode duplex connectors to enable optical signal pass-through within cabling systems. It is intended for use in LAN and telecom environments where compact, panel-mounted coupling is required and supports common Ethernet and datacom link types.
The outer casing is moulded from polybutylene terephthalate while sleeve options include phosphor bronze or zirconia depending on required wear and alignment characteristics.
The adaptor functions across a broad range from -40°C to +75°C, suitable for indoor and controlled-environment infrastructure.
Sleeve and ferrule withdrawal forces are controlled within a 200gf-600gf range to maintain retention without excessive connector stress.
Variants in the family include simplex and quad formats to suit different port densities and patching requirements.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 7,39
€ 7,39 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 9,16
€ 9,16 Μονάδας Με Φ.Π.Α
1
€ 7,39
€ 7,39 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 9,16
€ 9,16 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Product Type
Fibre Optic Adapter
Connector Type
LC to LC
Single/Multimode
Multimode
Simplex/Duplex
Duplex
Colour
Beige
Insertion Loss
0.3dB
Housing Material
Polybutylene Terephthalate
Connector Type A
LC
Connector Type B
LC
Height
9.3mm
Depth
35mm
Standards/Approvals
RoHS, GR-326 Core Issue 4, IEC 61754, IEC 61753-1
Width
15mm
Series
HT-DS-FIBRE-ADAPTORS-R10
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
This fibre optic adaptor connects two LC multimode duplex connectors to enable optical signal pass-through within cabling systems. It is intended for use in LAN and telecom environments where compact, panel-mounted coupling is required and supports common Ethernet and datacom link types.
The outer casing is moulded from polybutylene terephthalate while sleeve options include phosphor bronze or zirconia depending on required wear and alignment characteristics.
The adaptor functions across a broad range from -40°C to +75°C, suitable for indoor and controlled-environment infrastructure.
Sleeve and ferrule withdrawal forces are controlled within a 200gf-600gf range to maintain retention without excessive connector stress.
Variants in the family include simplex and quad formats to suit different port densities and patching requirements.
