HellermannTyton WIC3 Snap On Cable Markers, Violet, Pre-printed ""7"", 4.3 → 5.3mm Cable
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
HellermannTytonAffixing Method
Snap On
Legend
7
Minimum Cable Diameter
4.3mm
Maximum Cable Diameter
5.3mm
Colour
Violet
Length
3mm
Width
8 mm
Quantity
100
Printable
No
Material
Polyamide
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+85°C
Resistant To
Vibrations
Series
WIC3
Cable Diameter Range
4.3 → 5.3mm
Operating Temperature Range
-40 → +85 °C
Λεπτομέρειες Προϊόντος
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 13,56
1 Σακούλα των 100 (Exc. Vat)Χωρίς Φ.Π.Α
€ 16,81
1 Σακούλα των 100 (Including VAT) Με Φ.Π.Α
1
€ 13,56
1 Σακούλα των 100 (Exc. Vat)Χωρίς Φ.Π.Α
€ 16,81
1 Σακούλα των 100 (Including VAT) Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 14 | € 13,56 |
| 15 - 49 | € 13,13 |
| 50+ | € 12,55 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
HellermannTytonAffixing Method
Snap On
Legend
7
Minimum Cable Diameter
4.3mm
Maximum Cable Diameter
5.3mm
Colour
Violet
Length
3mm
Width
8 mm
Quantity
100
Printable
No
Material
Polyamide
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+85°C
Resistant To
Vibrations
Series
WIC3
Cable Diameter Range
4.3 → 5.3mm
Operating Temperature Range
-40 → +85 °C
Λεπτομέρειες Προϊόντος
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.