Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
HiroseProduct Type
PCB Header
Series
DF20
Pitch
1mm
Current
1A
Number of Contacts
10
Housing Material
Polyamide
Number of Rows
2
Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire-to-Board
Mount Type
Surface
Contact Material
Copper Alloy
Contact Plating
Tin
Minimum Operating Temperature
-35°C
Row Pitch
1mm
Termination Type
Solder
Contact Gender
Male
Maximum Operating Temperature
85°C
Standards/Approvals
No
Χώρα Προέλευσης
Japan
Λεπτομέρειες Προϊόντος
Double Row Right angle Pin header
1.0mm Double-Row Connector - Hirose DF20
Board to wire connector range, 1mm contact pitch,Low profile design with a mating height above the PCB of 5.8mm,Mechanism to prevent mis-insertion
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 303,75
€ 2,43 Μονάδας (διαθέσιμο σε μία ράγα) (Exc. Vat)Χωρίς Φ.Π.Α
€ 376,65
€ 3,013 Μονάδας (διαθέσιμο σε μία ράγα) Με Φ.Π.Α
Συσκευασία Παραγωγής (Ράγα)
125
€ 303,75
€ 2,43 Μονάδας (διαθέσιμο σε μία ράγα) (Exc. Vat)Χωρίς Φ.Π.Α
€ 376,65
€ 3,013 Μονάδας (διαθέσιμο σε μία ράγα) Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Συσκευασία Παραγωγής (Ράγα)
125
| Quantity Ποσότητα | Τιμή μονάδας | Per Ράγα |
|---|---|---|
| 125 - 495 | € 2,43 | € 12,15 |
| 500 - 2495 | € 2,04 | € 10,20 |
| 2500 - 4995 | € 1,67 | € 8,35 |
| 5000+ | € 1,57 | € 7,85 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
HiroseProduct Type
PCB Header
Series
DF20
Pitch
1mm
Current
1A
Number of Contacts
10
Housing Material
Polyamide
Number of Rows
2
Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire-to-Board
Mount Type
Surface
Contact Material
Copper Alloy
Contact Plating
Tin
Minimum Operating Temperature
-35°C
Row Pitch
1mm
Termination Type
Solder
Contact Gender
Male
Maximum Operating Temperature
85°C
Standards/Approvals
No
Χώρα Προέλευσης
Japan
Λεπτομέρειες Προϊόντος
Double Row Right angle Pin header
1.0mm Double-Row Connector - Hirose DF20
Board to wire connector range, 1mm contact pitch,Low profile design with a mating height above the PCB of 5.8mm,Mechanism to prevent mis-insertion


