Honeywell 1CPS Rope Pull Switch, 76m, 2NO/2NC, Straight
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
HoneywellNormal State Configuration
2NO/2NC
Cable Length
76m
Mounting Orientation
Straight
IP Rating
IP67
Series
1CPS
Length
172.72mm
Width
99.06mm
Depth
62.2mm
Housing Material
Die Cast Zinc
Maximum DC Voltage
250V
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+80°C
Maximum AC Voltage
600V
Dimensions
172.72 x 99.06 x 62.2mm
Maximum Current
10A
Conduit Entry
1/2 in NPT
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
Honeywell 1CPS Cable Pull Safety Switches
The 1CPS cable pull safety switch series is intended for applications such as conveyor runs within a defined system zone with a cable run of up to 76 meters. This means they are more cost effective than using a comparable multiple emergency stop push button system.
The internal mechanism is latched by both a push and pull action. This provides extra protection should the cable become slackened or broken over time. A midpoint cable tension window indicates the correct cable tension making it easy to set up. Once the contacts have been switched they must be reset by resetting the cable to the correct tension level and manually rotating the rest knob.
For extra protection a set of auxiliary contacts are switched when the main contact open allowing for monitoring or signalling equipment to be activated such as a flashing beacon. The auxiliary contacts are electrically isolated form the direct acting switch contacts meaning a closed circuit can be maintained even when the main contacts are in the open position.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 628,08
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 778,82
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 628,08
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 778,82
Μονάδας (Including VAT) Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
HoneywellNormal State Configuration
2NO/2NC
Cable Length
76m
Mounting Orientation
Straight
IP Rating
IP67
Series
1CPS
Length
172.72mm
Width
99.06mm
Depth
62.2mm
Housing Material
Die Cast Zinc
Maximum DC Voltage
250V
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+80°C
Maximum AC Voltage
600V
Dimensions
172.72 x 99.06 x 62.2mm
Maximum Current
10A
Conduit Entry
1/2 in NPT
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
Honeywell 1CPS Cable Pull Safety Switches
The 1CPS cable pull safety switch series is intended for applications such as conveyor runs within a defined system zone with a cable run of up to 76 meters. This means they are more cost effective than using a comparable multiple emergency stop push button system.
The internal mechanism is latched by both a push and pull action. This provides extra protection should the cable become slackened or broken over time. A midpoint cable tension window indicates the correct cable tension making it easy to set up. Once the contacts have been switched they must be reset by resetting the cable to the correct tension level and manually rotating the rest knob.
For extra protection a set of auxiliary contacts are switched when the main contact open allowing for monitoring or signalling equipment to be activated such as a flashing beacon. The auxiliary contacts are electrically isolated form the direct acting switch contacts meaning a closed circuit can be maintained even when the main contacts are in the open position.