Hydralectric Solenoid Valve 72003, 2 Port, NC, 12 V dc
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
HydralectricProduct Type
Solenoid Valve
Supply Voltage
12 V dc
Number of Ports
2
Default Valve Position
NC
Orifice Diameter
31.8mm
Series
720
Body Material
Polyamide
Application
Refrigeration Equipment, Hand Washers, Automatic Tap System, Water
Maximum Operating Pressure
10 bar
Minimum Operating Temperature
60°C
Maximum Operating Temperature
60°C
Standards/Approvals
No
Hazardous Area Certification
No
Maximum Opening Time
3min
Maximum Closing Time
5min
Λεπτομέρειες Προϊόντος
Two-way Solenoid Valves
Two-way solenoid diaphragm operated, normally closed valves are ideal for controlling water pressure 0.2 to 10 bar. The valve is continuously rated when the fluid temperature is below 25°C, the ambient temperature is below 60°C and the flow rate is above 5 L/min. A duty cycle of 40% is required for fluid temperatures up to 90°C
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 44,24
€ 44,24 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 54,86
€ 54,86 Μονάδας Με Φ.Π.Α
1
€ 44,24
€ 44,24 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 54,86
€ 54,86 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 44,24 |
| 5+ | € 43,62 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
HydralectricProduct Type
Solenoid Valve
Supply Voltage
12 V dc
Number of Ports
2
Default Valve Position
NC
Orifice Diameter
31.8mm
Series
720
Body Material
Polyamide
Application
Refrigeration Equipment, Hand Washers, Automatic Tap System, Water
Maximum Operating Pressure
10 bar
Minimum Operating Temperature
60°C
Maximum Operating Temperature
60°C
Standards/Approvals
No
Hazardous Area Certification
No
Maximum Opening Time
3min
Maximum Closing Time
5min
Λεπτομέρειες Προϊόντος
Two-way Solenoid Valves
Two-way solenoid diaphragm operated, normally closed valves are ideal for controlling water pressure 0.2 to 10 bar. The valve is continuously rated when the fluid temperature is below 25°C, the ambient temperature is below 60°C and the flow rate is above 5 L/min. A duty cycle of 40% is required for fluid temperatures up to 90°C