Idec Push Button Tool Kit
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
IdecProduct Type
Push Button Tool Kit
For Use With
A8 Series
Standards/Approvals
CE, CSA, UL
Χώρα Προέλευσης
Japan
Λεπτομέρειες Προϊόντος
Fitting Toolkit, 8mm push buttons.
Product Description:
The Idec fitting tool kit is made up of three component parts required to fit and maintain Idec 8mm sub-miniature push button switches.
MT-004: is a locking ring wrench that is used to tighten the locking ring at the point of installation of the control unit into the panel. It is important to note not to exceed 0.29 N m when tightening the locking ring to avoid damage.
MT-101: the stainless steel lens removal tool can be used to remove both the lens and buttons.
OR-66: This part is a rubber lamp holder tool that is used to remove and install LED lamps.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 11,56
€ 11,56 1 Κιτ (Exc. Vat)Χωρίς Φ.Π.Α
€ 14,33
€ 14,33 1 Κιτ Με Φ.Π.Α
1
€ 11,56
€ 11,56 1 Κιτ (Exc. Vat)Χωρίς Φ.Π.Α
€ 14,33
€ 14,33 1 Κιτ Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 14 | € 11,56 |
| 15 - 49 | € 10,81 |
| 50 - 99 | € 9,27 |
| 100 - 249 | € 9,08 |
| 250+ | € 8,93 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
IdecProduct Type
Push Button Tool Kit
For Use With
A8 Series
Standards/Approvals
CE, CSA, UL
Χώρα Προέλευσης
Japan
Λεπτομέρειες Προϊόντος
Fitting Toolkit, 8mm push buttons.
Product Description:
The Idec fitting tool kit is made up of three component parts required to fit and maintain Idec 8mm sub-miniature push button switches.
MT-004: is a locking ring wrench that is used to tighten the locking ring at the point of installation of the control unit into the panel. It is important to note not to exceed 0.29 N m when tightening the locking ring to avoid damage.
MT-101: the stainless steel lens removal tool can be used to remove both the lens and buttons.
OR-66: This part is a rubber lamp holder tool that is used to remove and install LED lamps.