ifm electronic Through Beam Photoelectric Sensor, Fork Sensor, >0.3 mm Detection Range

Κωδικός Προϊόντος της RS: 136-5397Κατασκευαστής: ifm electronicΚωδικός Κατασκευαστή: OPU200
brand-logo
View all in Photoelectric Sensors

Τεχνικό φυλλάδιο

Προδιαγραφές

Sensor Style

Fork

Detection Type

Through Beam

Detection Range

>0.3 mm

Output Type

NPN/PNP

Electrical Connection

M8 3 Pin Connector

Maximum dc Voltage

35V

Terminal Type

Quick Disconnect

Light Source

LED

IP Rating

IP67

Maximum Current

40 mA

Maximum Operating Temperature

+60°C

Housing Material

Die Cast Zinc

Minimum Operating Temperature

-25°C

Standards Met

CE, cULus

Χώρα Προέλευσης

Germany

Λεπτομέρειες Προϊόντος

ifm OPU Optical Fork Sensors

ifm OPU series optical fork sensors with a robust metal housing offer quick setup with no need to align a transmitter and receiver. These optical sensors are used in particular for part monitoring in feeder and handling systems. Further application examples are belt edge or double feed monitoring with the exact sensitivity setting via potentiometer being helpful. The fine light beam with its constant small diameter is also ideal for monitoring shaft imbalance.

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Παρακαλούμε ελέγξτε ξανά αργότερα.

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

€ 269,25

Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 333,87

Μονάδας (Including VAT) Με Φ.Π.Α

ifm electronic Through Beam Photoelectric Sensor, Fork Sensor, >0.3 mm Detection Range

€ 269,25

Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 333,87

Μονάδας (Including VAT) Με Φ.Π.Α

ifm electronic Through Beam Photoelectric Sensor, Fork Sensor, >0.3 mm Detection Range
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Τεχνικό φυλλάδιο

Προδιαγραφές

Sensor Style

Fork

Detection Type

Through Beam

Detection Range

>0.3 mm

Output Type

NPN/PNP

Electrical Connection

M8 3 Pin Connector

Maximum dc Voltage

35V

Terminal Type

Quick Disconnect

Light Source

LED

IP Rating

IP67

Maximum Current

40 mA

Maximum Operating Temperature

+60°C

Housing Material

Die Cast Zinc

Minimum Operating Temperature

-25°C

Standards Met

CE, cULus

Χώρα Προέλευσης

Germany

Λεπτομέρειες Προϊόντος

ifm OPU Optical Fork Sensors

ifm OPU series optical fork sensors with a robust metal housing offer quick setup with no need to align a transmitter and receiver. These optical sensors are used in particular for part monitoring in feeder and handling systems. Further application examples are belt edge or double feed monitoring with the exact sensitivity setting via potentiometer being helpful. The fine light beam with its constant small diameter is also ideal for monitoring shaft imbalance.