INA HK1516-2RS-L271 15mm I.D Drawn Cup Needle Roller Bearing, 21mm O.D
Technical Document
Specifications
Brand
INAInside Diameter
15mm
Outside Diameter
21mm
Roller Bearing Type
Drawn Cup Needle
Race Width
16mm
Bore Type
Parallel
Material
Steel
Static Load Rating
9800N
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
7800N
End Type
Sealed
Limiting Speed
9900rpm
Fatigue Limit Load
1190N
Maximum Speed - Grease
9900rpm
Country of Origin
Germany
Product details
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.
Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs
• Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides
RS - Contact seal on one side
ZW - Double row design, with lubrication hole
INA
€ 12.35
€ 12.35 Each (Exc. Vat)
€ 15.31
€ 15.31 Each (inc. VAT)
1
€ 12.35
€ 12.35 Each (Exc. Vat)
€ 15.31
€ 15.31 Each (inc. VAT)
1
Stock information temporarily unavailable.
Please check again later.
| quantity | Unit price |
|---|---|
| 1 - 4 | € 12.35 |
| 5 - 9 | € 12.03 |
| 10 - 24 | € 11.96 |
| 25+ | € 11.90 |
Technical Document
Specifications
Brand
INAInside Diameter
15mm
Outside Diameter
21mm
Roller Bearing Type
Drawn Cup Needle
Race Width
16mm
Bore Type
Parallel
Material
Steel
Static Load Rating
9800N
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
7800N
End Type
Sealed
Limiting Speed
9900rpm
Fatigue Limit Load
1190N
Maximum Speed - Grease
9900rpm
Country of Origin
Germany
Product details
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.
Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs
• Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides
RS - Contact seal on one side
ZW - Double row design, with lubrication hole