Stud Cam Follower NUKR35A, 16mm ID, 35mm OD
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
INARoller Diameter
35mm
Roller Length
18mm
Type
Stud
Bore Size
16mm
Static Load Rating
18700N
Dynamic Load Rating
15300N
Material
Steel
Λεπτομέρειες Προϊόντος
Stud Type Track Rollers
INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole.
Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running.
Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided.
INA
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 123,76
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 153,46
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 123,76
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 153,46
Μονάδας (Including VAT) Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 123,76 |
| 5 - 9 | € 120,64 |
| 10 - 24 | € 119,88 |
| 25+ | € 119,10 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
INARoller Diameter
35mm
Roller Length
18mm
Type
Stud
Bore Size
16mm
Static Load Rating
18700N
Dynamic Load Rating
15300N
Material
Steel
Λεπτομέρειες Προϊόντος
Stud Type Track Rollers
INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole.
Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running.
Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided.