Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
InfineonMotor Type
BLDC
Output Configuration
Full Bridge
Maximum IGBT Collector Current
6A
Maximum Collector Emitter Voltage
40 V
Mounting Type
Surface Mount
Package Type
DSO-20-37
Pin Count
20
Maximum Operating Supply Voltage
40 V
Typical Switching Frequency
2MHz
Height
3.5mm
Width
11mm
Minimum Operating Temperature
-40 °C
Dimensions
15.9 x 11 x 3.5mm
Maximum Operating Temperature
+150 °C
Length
15.9mm
Λεπτομέρειες Προϊόντος
Motor Driver ICs, Infineon
Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineons single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.
Motor Controllers & Drivers, Infineon
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
P.O.A.
800
P.O.A.
800
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
InfineonMotor Type
BLDC
Output Configuration
Full Bridge
Maximum IGBT Collector Current
6A
Maximum Collector Emitter Voltage
40 V
Mounting Type
Surface Mount
Package Type
DSO-20-37
Pin Count
20
Maximum Operating Supply Voltage
40 V
Typical Switching Frequency
2MHz
Height
3.5mm
Width
11mm
Minimum Operating Temperature
-40 °C
Dimensions
15.9 x 11 x 3.5mm
Maximum Operating Temperature
+150 °C
Length
15.9mm
Λεπτομέρειες Προϊόντος
Motor Driver ICs, Infineon
Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineons single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.