Kübler K 07.20 Counter Counter, 7 Digit
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
KüblerCount Mode
Impulses
Input Type
Voltage
Connection Type
Solder Pin
Reset Method
No Reset
Number Of Digits
7
Mounting Type
Panel Mount
Output / Interface
Voltage
Count Direction
Up
Digit Height
4 mm
Function
Counter
Cutout Size
30 x 13 mm
Measurement Range
0 → 9999999
Minimum Operating Temperature
-10°C
Minimum Measurement
0
Cutout Height
15mm
Series
K 07.20
Cutout Width
35mm
Depth
32.7mm
Meter Type
Electromechanical
Approvals
cULus, RoHS, UL
Maximum Operating Temperature
+60°C
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
Type K07 - micro cumulative counter, 7-digit, front panel mounting
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 49,30
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 61,13
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 49,30
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 61,13
Μονάδας (Including VAT) Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 49,30 |
| 5 - 9 | € 48,55 |
| 10+ | € 47,26 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
KüblerCount Mode
Impulses
Input Type
Voltage
Connection Type
Solder Pin
Reset Method
No Reset
Number Of Digits
7
Mounting Type
Panel Mount
Output / Interface
Voltage
Count Direction
Up
Digit Height
4 mm
Function
Counter
Cutout Size
30 x 13 mm
Measurement Range
0 → 9999999
Minimum Operating Temperature
-10°C
Minimum Measurement
0
Cutout Height
15mm
Series
K 07.20
Cutout Width
35mm
Depth
32.7mm
Meter Type
Electromechanical
Approvals
cULus, RoHS, UL
Maximum Operating Temperature
+60°C
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
Type K07 - micro cumulative counter, 7-digit, front panel mounting
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.