Legris
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
LegrisProduct Type
Pneumatic Fitting
Maximum Operating Temperature
80°C
Finish
Nickel Plated
Χώρα Προέλευσης
France
Λεπτομέρειες Προϊόντος
Stud Run Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.
Threaded Tube Adaptors, Elbows and Tees
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 169,65
€ 33,93 Μονάδας (Σε ένα πακέτο των 5) (Exc. Vat)Χωρίς Φ.Π.Α
€ 210,37
€ 42,073 Μονάδας (Σε ένα πακέτο των 5) Με Φ.Π.Α
5
€ 169,65
€ 33,93 Μονάδας (Σε ένα πακέτο των 5) (Exc. Vat)Χωρίς Φ.Π.Α
€ 210,37
€ 42,073 Μονάδας (Σε ένα πακέτο των 5) Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
5
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
LegrisProduct Type
Pneumatic Fitting
Maximum Operating Temperature
80°C
Finish
Nickel Plated
Χώρα Προέλευσης
France
Λεπτομέρειες Προϊόντος
Stud Run Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.
Threaded Tube Adaptors, Elbows and Tees
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products