Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
LegrisConnector A
Push In 10 mm
Connector B
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Maximum Operating Temperature
+80°C
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Χώρα Προέλευσης
France
Λεπτομέρειες Προϊόντος
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.
Threaded Tube Adaptors, Elbows and Tees
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 15,48
Μονάδας (Σε ένα πακέτο των 2) (Exc. Vat)Χωρίς Φ.Π.Α
€ 19,195
Μονάδας (Σε ένα πακέτο των 2) (Including VAT) Με Φ.Π.Α
2
€ 15,48
Μονάδας (Σε ένα πακέτο των 2) (Exc. Vat)Χωρίς Φ.Π.Α
€ 19,195
Μονάδας (Σε ένα πακέτο των 2) (Including VAT) Με Φ.Π.Α
2
Αγοράστε μαζικά
Quantity Ποσότητα | Τιμή μονάδας | Per Πακέτο |
---|---|---|
2 - 8 | € 15,48 | € 30,96 |
10 - 18 | € 15,22 | € 30,44 |
20+ | € 14,97 | € 29,94 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
LegrisConnector A
Push In 10 mm
Connector B
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Maximum Operating Temperature
+80°C
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Χώρα Προέλευσης
France
Λεπτομέρειες Προϊόντος
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.