Legris LF3000 Series Tee Threaded Adaptor, Push In 4 mm to Push In 4 mm, Threaded-to-Tube Connection Style
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
LegrisConnector A
Push In 4 mm
Connector B
Push In 4 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
M5 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Χώρα Προέλευσης
France
Λεπτομέρειες Προϊόντος
Stud Run Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.
Threaded Tube Adaptors, Elbows and Tees
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 9,23
Μονάδας (Σε ένα πακέτο των 5) (Exc. Vat)Χωρίς Φ.Π.Α
€ 11,445
Μονάδας (Σε ένα πακέτο των 5) Με Φ.Π.Α
5
€ 9,23
Μονάδας (Σε ένα πακέτο των 5) (Exc. Vat)Χωρίς Φ.Π.Α
€ 11,445
Μονάδας (Σε ένα πακέτο των 5) Με Φ.Π.Α
5
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας | Per Πακέτο |
|---|---|---|
| 5 - 20 | € 9,23 | € 46,15 |
| 25 - 45 | € 9,07 | € 45,35 |
| 50+ | € 8,92 | € 44,60 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
LegrisConnector A
Push In 4 mm
Connector B
Push In 4 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
M5 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Χώρα Προέλευσης
France
Λεπτομέρειες Προϊόντος
Stud Run Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.