Lenze Locking Bush TLK110 10X16, 10mm Shaft Diameter
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
LenzeShaft Diameter
10mm
Outside Diameter
16mm
Locking Bush Type
Locking Bush
Flange Diameter
28mm
Length
30mm
Rated Torque
49Nm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+300°C
Series
Tollok TLK110
Χώρα Προέλευσης
Italy
Λεπτομέρειες Προϊόντος
TOLLOK TLK 110 Locking Bushes
Tollok manufactures highly engineered shaft locking devices for the power generation, process industries, and general industrial applications. For more than 35 years their products have been used to secure rotating shafts, manage torque transmission, and counteract shaft bending and vibration.
These industry standard shaft-to-hub locking bushes offer infinite radial and axial adjustment. They are designed for the economic mounting of gears, pulleys, cams, sprockets, and so on, where frequent removal is not required.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 38,67
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 47,95
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 38,67
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 47,95
Μονάδας (Including VAT) Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 38,67 |
| 5 - 9 | € 37,71 |
| 10+ | € 37,43 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
LenzeShaft Diameter
10mm
Outside Diameter
16mm
Locking Bush Type
Locking Bush
Flange Diameter
28mm
Length
30mm
Rated Torque
49Nm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+300°C
Series
Tollok TLK110
Χώρα Προέλευσης
Italy
Λεπτομέρειες Προϊόντος
TOLLOK TLK 110 Locking Bushes
Tollok manufactures highly engineered shaft locking devices for the power generation, process industries, and general industrial applications. For more than 35 years their products have been used to secure rotating shafts, manage torque transmission, and counteract shaft bending and vibration.
These industry standard shaft-to-hub locking bushes offer infinite radial and axial adjustment. They are designed for the economic mounting of gears, pulleys, cams, sprockets, and so on, where frequent removal is not required.