Martindale PD240 Proving Unit 2mA 240 V
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
MartindaleProduct Type
Proving Unit
Output Voltage
240 V
Power Source
Battery
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
40°C
Width
63 mm
Length
144mm
Height
31mm
Weight
180g
Standards/Approvals
No
Test Current
2mA
Χώρα Προέλευσης
Philippines
Λεπτομέρειες Προϊόντος
Martindale PD240 Pocket Sized Proving Unit
The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces.
Supplied with
Battery, belt clip, instruction manual
Standards
BS-EN61010-1 2001
Martindale Lock-Off Kits, Voltage Indicators and Proving Units
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 143,67
€ 143,67 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 178,15
€ 178,15 Μονάδας Με Φ.Π.Α
Calibration type
No Calibration
1
€ 143,67
€ 143,67 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 178,15
€ 178,15 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Calibration type
No Calibration
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
MartindaleProduct Type
Proving Unit
Output Voltage
240 V
Power Source
Battery
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
40°C
Width
63 mm
Length
144mm
Height
31mm
Weight
180g
Standards/Approvals
No
Test Current
2mA
Χώρα Προέλευσης
Philippines
Λεπτομέρειες Προϊόντος
Martindale PD240 Pocket Sized Proving Unit
The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces.
Supplied with
Battery, belt clip, instruction manual
Standards
BS-EN61010-1 2001