McLennan Servo Supplies Spur Gearbox, 25:2 Gear Ratio, 2.5 Nm Maximum Torque
Τεχνικό φυλλάδιο
Προδιαγραφές
Gear Ratio
25:2
Gearbox Type
Spur
Maximum Output Torque
2.5 Nm
Overall Width
56mm
Overall Depth
41mm
Λεπτομέρειες Προϊόντος
Adaptable Gearboxes 4Nm
A range of high quality steel geared gearboxes with the following features:
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 167,77
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 208,03
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 167,77
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 208,03
Μονάδας (Including VAT) Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 167,77 |
| 5+ | € 165,07 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Gear Ratio
25:2
Gearbox Type
Spur
Maximum Output Torque
2.5 Nm
Overall Width
56mm
Overall Depth
41mm
Λεπτομέρειες Προϊόντος
Adaptable Gearboxes 4Nm
A range of high quality steel geared gearboxes with the following features:
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: