Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
MeggerTest Equipment Type
Combined Loop and RCD Tester
Product Type
Loop Impendence & RCD Combined Tester
Loop Impedance Test Type
2 Wire
Maximum Voltage Measurement
440V
RCD Test Type
AC
RCD Test Current
4A
Non-Trip Loop Test
Yes
Display Type
LCD
Minimum Operating Temperature
-10°C
Loop Test Accuracy
±10 %
Battery Type
AA
Maximum Operating Temperature
50°C
Power Source
Battery
Width
148 mm
Height
78mm
Length
203mm
Weight
1kg
Standards/Approvals
IEC 61326-1
Calibrated
UKAS
Safety Category Level
CAT IV
Safety Category Voltage
300V
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
LTW 300 Series
Earth loop impedance testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy 2 wire loop testing solution that does not trip 30mA RCDs and can be used on a wide range of voltages.
Supplied with
Test lead set with crocodile clips, mains socket test lead, 8 AA alkaline batteries, hard carry case and instructions.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 1.348,87
€ 1.348,87 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 1.672,60
€ 1.672,60 Μονάδας Με Φ.Π.Α
Calibration type
UKAS Calibration
1
€ 1.348,87
€ 1.348,87 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 1.672,60
€ 1.672,60 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Calibration type
UKAS Calibration
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
MeggerTest Equipment Type
Combined Loop and RCD Tester
Product Type
Loop Impendence & RCD Combined Tester
Loop Impedance Test Type
2 Wire
Maximum Voltage Measurement
440V
RCD Test Type
AC
RCD Test Current
4A
Non-Trip Loop Test
Yes
Display Type
LCD
Minimum Operating Temperature
-10°C
Loop Test Accuracy
±10 %
Battery Type
AA
Maximum Operating Temperature
50°C
Power Source
Battery
Width
148 mm
Height
78mm
Length
203mm
Weight
1kg
Standards/Approvals
IEC 61326-1
Calibrated
UKAS
Safety Category Level
CAT IV
Safety Category Voltage
300V
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
LTW 300 Series
Earth loop impedance testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy 2 wire loop testing solution that does not trip 30mA RCDs and can be used on a wide range of voltages.
Supplied with
Test lead set with crocodile clips, mains socket test lead, 8 AA alkaline batteries, hard carry case and instructions.
