Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
MetcalProduct Type
Wire Wrapping Tool
Sub Type
Socket Wrap-ID
Minimum Wire Size AWG
30AWG
Maximum Wire Size AWG
22AWG
Standards/Approvals
No
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
If you need to create a durable, consistent point-to-point connection on your printed circuit boards (PCBs), use this manual wire wrapping tool from Metcal. It enables you to twist a wire around a PCB post instead of soldering it in place.
This tool holds a size 30 American Wire Gauge (AWG) wire in a fitted slot and fits over the post on your PCB. You can then simply turn the tool until the wire is wrapped tightly and securely.
The wire wrap method creates a greater amount of contact between the wire and the post, which makes for a more efficient connection. It's also easier to repair, as you can unwrap and rewrap the wire using the same tool. This type of tool is often used to connect wires during the prototyping stage of system development.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 112,01
€ 112,01 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 138,89
€ 138,89 Μονάδας Με Φ.Π.Α
1
€ 112,01
€ 112,01 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 138,89
€ 138,89 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
MetcalProduct Type
Wire Wrapping Tool
Sub Type
Socket Wrap-ID
Minimum Wire Size AWG
30AWG
Maximum Wire Size AWG
22AWG
Standards/Approvals
No
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
If you need to create a durable, consistent point-to-point connection on your printed circuit boards (PCBs), use this manual wire wrapping tool from Metcal. It enables you to twist a wire around a PCB post instead of soldering it in place.
This tool holds a size 30 American Wire Gauge (AWG) wire in a fitted slot and fits over the post on your PCB. You can then simply turn the tool until the wire is wrapped tightly and securely.
The wire wrap method creates a greater amount of contact between the wire and the post, which makes for a more efficient connection. It's also easier to repair, as you can unwrap and rewrap the wire using the same tool. This type of tool is often used to connect wires during the prototyping stage of system development.
