Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
MicrochipProduct Type
Analogue to Digital Converter (ADC)
Architecture
Delta Sigma
Number of ADCs
3
Resolution
24 bit
Sampling Rate
4000kHz
Mount Type
Surface
Input Type
Single Ended
Package Type
SSOP
Pin Count
28
Minimum Operating Temperature
-40°C
Interface Type
SPI
Maximum Operating Temperature
125°C
Minimum Supply Voltage
2.7V
Length
10.5mm
Height
2mm
Standards/Approvals
RoHS
Series
MCP391
Maximum Supply Voltage
3.6V
Automotive Standard
No
Λεπτομέρειες Προϊόντος
The Microchip 3V three channel Analog-Front-End (AFE) containing three simultaneous sampling Delta-Sigma Analog to Digital Converters (ADC), three PGAs, phase delay compensation block, internal voltage reference, digital offset and gain error calibration registers and high-speed 20 MHz SPI compatible serial interface. A 2-wire serial interface mode greatly reduces system cost by requiring only a single bidirectional isolator per phase.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 6.027,00
€ 2,87 Μονάδας (Σε ένα καρούλι των 2100) (Exc. Vat)Χωρίς Φ.Π.Α
€ 7.473,48
€ 3,559 Μονάδας (Σε ένα καρούλι των 2100) Με Φ.Π.Α
2100
€ 6.027,00
€ 2,87 Μονάδας (Σε ένα καρούλι των 2100) (Exc. Vat)Χωρίς Φ.Π.Α
€ 7.473,48
€ 3,559 Μονάδας (Σε ένα καρούλι των 2100) Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
2100
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
MicrochipProduct Type
Analogue to Digital Converter (ADC)
Architecture
Delta Sigma
Number of ADCs
3
Resolution
24 bit
Sampling Rate
4000kHz
Mount Type
Surface
Input Type
Single Ended
Package Type
SSOP
Pin Count
28
Minimum Operating Temperature
-40°C
Interface Type
SPI
Maximum Operating Temperature
125°C
Minimum Supply Voltage
2.7V
Length
10.5mm
Height
2mm
Standards/Approvals
RoHS
Series
MCP391
Maximum Supply Voltage
3.6V
Automotive Standard
No
Λεπτομέρειες Προϊόντος
The Microchip 3V three channel Analog-Front-End (AFE) containing three simultaneous sampling Delta-Sigma Analog to Digital Converters (ADC), three PGAs, phase delay compensation block, internal voltage reference, digital offset and gain error calibration registers and high-speed 20 MHz SPI compatible serial interface. A 2-wire serial interface mode greatly reduces system cost by requiring only a single bidirectional isolator per phase.