Microchip Digital Potentiometer 257-Position 5 kΩ Linear 2-Channel 8-Pin PDIP

MCP414x/416x/424x/426x Digital Potentiometers

The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers with a SPI interface and EEPROM memory.
Featured is WiperLock Technology, providing a method of ’locking’ the wiper configuration. To unlock a high-voltage command is required (>8.5 V), protecting the setting during normal operation.
7-bit (129 steps) and 8-bit (257 steps) versions are available in various R_AB resistance options from 5 kΩ to 100 kΩ. Further variants also give the choice between Rheostat and Potentiometer pinouts, Single and Dual Resistor Network options are also available.

Features

• Zero Scale to Full-Scale Wiper Operation
• Low Wiper Resistance: 75 Ω (typical)
• Low Temperature Coefficient: Absolute (Rheostat) 50 ppm, Ratiometric (Potentiometer) 15 ppm (typical)
• Automatic Recall of Saved Wiper Setting
• WiperLock Technology
• SPI Serial Interface
• Resistor Network Terminal Disconnect Feature
• Brown-Out Reset Protection: 1.5 V (typical)
• Serial Interface Inactive Current: 2.5 μA (typical)
• High-Voltage Tolerant Digital Inputs: Up to 12.5 V
• Supports Split Rail Applications
• Internal Weak Pull-Up on all Digital Inputs
• Wide Operating Voltage: 1.8 V to 5.5 V
• Wide Bandwidth (-3 dB) Operation: 2 MHz for 5.0 kΩ device (typical)

Model Variants

• Potentiometer Wiper Configuration: MCP4141, MCP4161, MCP4241, MCP4261
• Rheostat Wiper Configuration: MCP4142, MCP4162, MCP4242, MCP4262
• Single Resistor Network: MCP4141, MCP4142, MCP4161, MCP4162
• Dual Resistor Network: MCP4241, MCP4242, MCP4261, MCP4262
• 7-bit, 128 Resistors (129 steps): MCP4141, MCP4142, MCP4241, MCP4142
• 8-bit, 256 Resistors (257 steps): MCP4161, MCP4162, MCP4261, MCP4162

Digital Potentiometer - Microchip