MikroElektronika Button R Button MikroBus Click Board for mikroBUS INT
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
MikroElektronikaProduct Type
Development Kit
Standards/Approvals
RoHS
Kit Name
Button R
User Interface
Button
Kit Classification
MikroBus Click Board
Featured Device
mikroBUS INT
Λεπτομέρειες Προϊόντος
Button G Click & Button R Click mikroBUS™
Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.
136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED
Click mikroBUS™ Human-Machine Interface Boards
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 18,66
€ 18,66 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 23,14
€ 23,14 Μονάδας Με Φ.Π.Α
1
€ 18,66
€ 18,66 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 23,14
€ 23,14 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
MikroElektronikaProduct Type
Development Kit
Standards/Approvals
RoHS
Kit Name
Button R
User Interface
Button
Kit Classification
MikroBus Click Board
Featured Device
mikroBUS INT
Λεπτομέρειες Προϊόντος
Button G Click & Button R Click mikroBUS™
Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.
136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED