MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960

Κωδικός Προϊόντος της RS: 136-0780Κατασκευαστής: MikroElektronikaΚωδικός Κατασκευαστή: MIKROE-2040
brand-logo

Τεχνικό φυλλάδιο

Προδιαγραφές

Kit Classification

mikroBus Click Board

Featured Device

APDS-9960

Kit Name

Button G

Λεπτομέρειες Προϊόντος

Button G Click & Button R Click mikroBUS™

Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.

136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED

Click mikroBUS™ Human-Machine Interface Boards

€ 19,06

€ 19,06 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 23,63

€ 23,63 Μονάδας Με Φ.Π.Α

MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960

€ 19,06

€ 19,06 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 23,63

€ 23,63 Μονάδας Με Φ.Π.Α

MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Τεχνικό φυλλάδιο

Προδιαγραφές

Kit Classification

mikroBus Click Board

Featured Device

APDS-9960

Kit Name

Button G

Λεπτομέρειες Προϊόντος

Button G Click & Button R Click mikroBUS™

Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.

136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED

Click mikroBUS™ Human-Machine Interface Boards