Molex Premise Networks SLT3S Cable Tester STP, UTP
Τεχνικό φυλλάδιο
Προδιαγραφές
Equipment Type
Cable Tester
Connector Type
STP, UTP
Model Number p
SLT3S
Power Source
Battery
Battery Type
9V
Dimensions
146 x 58 x 38mm
Weight
284g
Display Type
LED
Height
144mm
Width
60mm
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
Molex UTP and STP Cable Tester
From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.
The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system
Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox
€ 171,89
€ 171,89 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 213,14
€ 213,14 Μονάδας Με Φ.Π.Α
1
€ 171,89
€ 171,89 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 213,14
€ 213,14 Μονάδας Με Φ.Π.Α
1
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
Τεχνικό φυλλάδιο
Προδιαγραφές
Equipment Type
Cable Tester
Connector Type
STP, UTP
Model Number p
SLT3S
Power Source
Battery
Battery Type
9V
Dimensions
146 x 58 x 38mm
Weight
284g
Display Type
LED
Height
144mm
Width
60mm
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
Molex UTP and STP Cable Tester
From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.
The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system
Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox