Molex Premise Networks Cable Tester STP, UTP
Τεχνικό φυλλάδιο
Προδιαγραφές
Equipment Type
Cable Tester
Connector Type
STP, UTP
Power Source
Battery
Battery Type
9V
Weight
284g
Display Type
LED
Height
144mm
Width
60mm
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
Molex UTP and STP Cable Tester
From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.
The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system
Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 156,43
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 193,97
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 156,43
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 193,97
Μονάδας (Including VAT) Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Equipment Type
Cable Tester
Connector Type
STP, UTP
Power Source
Battery
Battery Type
9V
Weight
284g
Display Type
LED
Height
144mm
Width
60mm
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
Molex UTP and STP Cable Tester
From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.
The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system
Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox