MTL Surge Suppressor Unit 240 V ac, 415 V ac Maximum Voltage Rating 1.2kA Maximum Surge Current Telephone Line Protector
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
MTLSuppressor Type
Telephone Line Protector
Maximum Voltage Rating
240 V ac, 415 V ac
Mounting Type
DIN Rail
Maximum Surge Current
1.2kA
Length
236mm
Depth
76mm
Height
125mm
Dimensions
236 x 76 x 125mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+85°C
Λεπτομέρειες Προϊόντος
Transient Voltage Suppressors (Modules,Industrial)
Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning activity and can reach up to 6000V, with current surges of up to 3000A. The maximum size of the voltage and current surges depends on the location within the buildings wiring system. BS6651:1999 Annex C which was replaced in August 2008 by BS EN 62305-4:2006 is complemented by BS EN 61643-11/12 and covers location categories and provides guidance on protection of electronic equipment. For mains power systems, Types I, II and III are used. Surge protection devices not designed to fit into these categories may only provide limited protection and the equipment they protect may suffer damage.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
P.O.A.
1
P.O.A.
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
MTLSuppressor Type
Telephone Line Protector
Maximum Voltage Rating
240 V ac, 415 V ac
Mounting Type
DIN Rail
Maximum Surge Current
1.2kA
Length
236mm
Depth
76mm
Height
125mm
Dimensions
236 x 76 x 125mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+85°C
Λεπτομέρειες Προϊόντος
Transient Voltage Suppressors (Modules,Industrial)
Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning activity and can reach up to 6000V, with current surges of up to 3000A. The maximum size of the voltage and current surges depends on the location within the buildings wiring system. BS6651:1999 Annex C which was replaced in August 2008 by BS EN 62305-4:2006 is complemented by BS EN 61643-11/12 and covers location categories and provides guidance on protection of electronic equipment. For mains power systems, Types I, II and III are used. Surge protection devices not designed to fit into these categories may only provide limited protection and the equipment they protect may suffer damage.