Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
NorgrenConnection Type B
Compression
Product Type
Brass Pipe Fitting
Connection Type A
Compression
Fitting Direction
Straight
Fitting Type
Fitting
Connection Standard A
Metric Tube
Connection Size A
8 mm
Connection Gender A
Female
Standards/Approvals
No
Material
Brass
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
Looking to put the pieces together in your industrial system? Reach for this brass pipe fitting from IMI Norgren to make a firm connection between two pieces of tubing. It's made up of two components – a compression nut and a ring. When tightened, the nut compresses the ring against the tubing to create a secure and leak-proof seal. This connects the parts without the need for soldering or welding, making it a popular choice in plumbing and fluid-handling applications.
To install it on copper tubing, first slide the compression nut and compression ring onto the tubing, ensuring the ring is positioned near the end of the pipe. Next, insert the end of the tubing into the fitting body until it reaches the stop. Finally hand-tighten the compression nut onto the body, then use a wrench to complete the connection.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 12,80
€ 1,28 Μονάδας (Σε ένα πακέτο των 10) (Exc. Vat)Χωρίς Φ.Π.Α
€ 15,87
€ 1,587 Μονάδας (Σε ένα πακέτο των 10) Με Φ.Π.Α
10
€ 12,80
€ 1,28 Μονάδας (Σε ένα πακέτο των 10) (Exc. Vat)Χωρίς Φ.Π.Α
€ 15,87
€ 1,587 Μονάδας (Σε ένα πακέτο των 10) Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
10
| Quantity Ποσότητα | Τιμή μονάδας | Per Πακέτο |
|---|---|---|
| 10 - 40 | € 1,28 | € 12,80 |
| 50 - 90 | € 1,25 | € 12,50 |
| 100+ | € 1,23 | € 12,30 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
NorgrenConnection Type B
Compression
Product Type
Brass Pipe Fitting
Connection Type A
Compression
Fitting Direction
Straight
Fitting Type
Fitting
Connection Standard A
Metric Tube
Connection Size A
8 mm
Connection Gender A
Female
Standards/Approvals
No
Material
Brass
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
Looking to put the pieces together in your industrial system? Reach for this brass pipe fitting from IMI Norgren to make a firm connection between two pieces of tubing. It's made up of two components – a compression nut and a ring. When tightened, the nut compresses the ring against the tubing to create a secure and leak-proof seal. This connects the parts without the need for soldering or welding, making it a popular choice in plumbing and fluid-handling applications.
To install it on copper tubing, first slide the compression nut and compression ring onto the tubing, ensuring the ring is positioned near the end of the pipe. Next, insert the end of the tubing into the fitting body until it reaches the stop. Finally hand-tighten the compression nut onto the body, then use a wrench to complete the connection.
