NSK-RHP, ST40 40 mm ID
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
NSK-RHPProduct Type
Bearing Unit
Inside Diameter
40mm
Locking Type
Set Screw
Housing Material
Cast Iron
Length
143.5mm
Width
118mm
Depth
49.5mm
Standards/Approvals
No
Series
ST
Static Load Rating
19.9kN
Limiting Speed
4000rpm
Λεπτομέρειες Προϊόντος
Self Lube Bearing Take-Up Unit
Take-up units are used to “take up” the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension.
Supplied with
grease nipples
Bearing Take-Up Units
Take-up units are often used where shaft or belt adjustment/tightening is required, and are often seen installed within conveyor systems. The units may also be installed within food processing environments and used for agricultural equipment applications.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 134,07
€ 134,07 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 166,25
€ 166,25 Μονάδας Με Φ.Π.Α
1
€ 134,07
€ 134,07 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 166,25
€ 166,25 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 134,07 |
| 5 - 9 | € 130,70 |
| 10+ | € 129,91 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
NSK-RHPProduct Type
Bearing Unit
Inside Diameter
40mm
Locking Type
Set Screw
Housing Material
Cast Iron
Length
143.5mm
Width
118mm
Depth
49.5mm
Standards/Approvals
No
Series
ST
Static Load Rating
19.9kN
Limiting Speed
4000rpm
Λεπτομέρειες Προϊόντος
Self Lube Bearing Take-Up Unit
Take-up units are used to “take up” the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension.
Supplied with
grease nipples
Bearing Take-Up Units
Take-up units are often used where shaft or belt adjustment/tightening is required, and are often seen installed within conveyor systems. The units may also be installed within food processing environments and used for agricultural equipment applications.