NSK BSN4075DDUHP2B R BE4L5 2 Row Ball Screw Support Bearing - 40 mm ID, 75 mm OD 34 mm Race Width
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
NSKProduct Type
Ball Screw Support Bearing
Inside Diameter
40 mm
Outside Diameter
75 mm
Race Width
34mm
Cage Material
Steel
Ball Material
Steel
End Type
Sealed
Number of Rows
2
Contact Angle
60°
Static Load Rating
88kN
Dynamic Load Rating
42kN
Series
BSN
Bore Type
Parallel
Standards/Approvals
No
Limiting Speed
3500rpm
Race Type
Plain
Bearing Type
Single Row Angular Contact Ball
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
Ball Screw Support Bearings - BSN Series
The BSN series of ball screw support bearings are double row, angular contact thrust ball bearings, with a 60° contact angle. They are equivalent to two single row bearings in a back-to-back arrangement, with a single outer ring. Bearings are supplied ready to be mounted. They come greased with long life lithium soap grease, with synthetic hydrocarbon base oil. Under normal operating conditions, the bearings are greased for life. A relubrication groove on the outside surface of the outer ring allows the bearings to be relubricated during operation if necessary. The bearings are sealed on both sides. The low friction contact lip seal runs in a grove in the inner ring giving excellent sealing characteristics, while minimising torque and heat generation. Preload is set during manufacture so that the correct loading is achieved when the lock nut is tightened to the recommended torque.
Ball Screw Support Bearings
€ 475,57
€ 475,57 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 589,71
€ 589,71 Μονάδας Με Φ.Π.Α
1
€ 475,57
€ 475,57 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 589,71
€ 589,71 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
NSKProduct Type
Ball Screw Support Bearing
Inside Diameter
40 mm
Outside Diameter
75 mm
Race Width
34mm
Cage Material
Steel
Ball Material
Steel
End Type
Sealed
Number of Rows
2
Contact Angle
60°
Static Load Rating
88kN
Dynamic Load Rating
42kN
Series
BSN
Bore Type
Parallel
Standards/Approvals
No
Limiting Speed
3500rpm
Race Type
Plain
Bearing Type
Single Row Angular Contact Ball
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
Ball Screw Support Bearings - BSN Series
The BSN series of ball screw support bearings are double row, angular contact thrust ball bearings, with a 60° contact angle. They are equivalent to two single row bearings in a back-to-back arrangement, with a single outer ring. Bearings are supplied ready to be mounted. They come greased with long life lithium soap grease, with synthetic hydrocarbon base oil. Under normal operating conditions, the bearings are greased for life. A relubrication groove on the outside surface of the outer ring allows the bearings to be relubricated during operation if necessary. The bearings are sealed on both sides. The low friction contact lip seal runs in a grove in the inner ring giving excellent sealing characteristics, while minimising torque and heat generation. Preload is set during manufacture so that the correct loading is achieved when the lock nut is tightened to the recommended torque.