Nuvotem Talema 230V ac, 2 x 30V ac Toroidal Transformer, 160VA 2 Output
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 30V ac
Power Rating
160VA
Number of Outputs
2
Secondary Current
2.67A
Height
42mm
Weight
1.5kg
Diameter
105mm
Dimensions
105 (Dia.) x 42mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Minimum Temperature
0°C
Isolation Voltage
4.5kV ac
Maximum Temperature
+120°C
Χώρα Προέλευσης
Czech Republic
Λεπτομέρειες Προϊόντος
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 128,60
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 159,46
Μονάδας Με Φ.Π.Α
1
€ 128,60
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 159,46
Μονάδας Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 30V ac
Power Rating
160VA
Number of Outputs
2
Secondary Current
2.67A
Height
42mm
Weight
1.5kg
Diameter
105mm
Dimensions
105 (Dia.) x 42mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Minimum Temperature
0°C
Isolation Voltage
4.5kV ac
Maximum Temperature
+120°C
Χώρα Προέλευσης
Czech Republic
Λεπτομέρειες Προϊόντος
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558