Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
onsemiMount Type
Surface
Product Type
Optocoupler
Maximum Forward Voltage
0.8V
Number of Pins
4
Package Type
6-Pin SOP
Typical Rise Time
15ns
Maximum Input Current
20mA
Isolation Voltage
5000V
Logic Output
Yes
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
100°C
Standards/Approvals
UL1577, DIN-EN/IEC60747-5-5
Typical Fall Time
10ns
Series
FOD848x
Automotive Standard
No
Λεπτομέρειες Προϊόντος
The FOD8480 and FOD8482 are low power optocouplers, which support isolated Interface to Intelligent Power Module (IPM) communicating digital control signals from the controller to the IPM, without conducting ground loops or hazardous voltages.
The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminium gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor.
The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 19,80
€ 1,98 Μονάδας (Σε ένα πακέτο των 10) (Exc. Vat)Χωρίς Φ.Π.Α
€ 24,55
€ 2,455 Μονάδας (Σε ένα πακέτο των 10) Με Φ.Π.Α
Standard
10
€ 19,80
€ 1,98 Μονάδας (Σε ένα πακέτο των 10) (Exc. Vat)Χωρίς Φ.Π.Α
€ 24,55
€ 2,455 Μονάδας (Σε ένα πακέτο των 10) Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Standard
10
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
onsemiMount Type
Surface
Product Type
Optocoupler
Maximum Forward Voltage
0.8V
Number of Pins
4
Package Type
6-Pin SOP
Typical Rise Time
15ns
Maximum Input Current
20mA
Isolation Voltage
5000V
Logic Output
Yes
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
100°C
Standards/Approvals
UL1577, DIN-EN/IEC60747-5-5
Typical Fall Time
10ns
Series
FOD848x
Automotive Standard
No
Λεπτομέρειες Προϊόντος
The FOD8480 and FOD8482 are low power optocouplers, which support isolated Interface to Intelligent Power Module (IPM) communicating digital control signals from the controller to the IPM, without conducting ground loops or hazardous voltages.
The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminium gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor.
The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum.
