Osram, 38 → 120V Output, 45W Output, 100 mA, 700 mA Output, Constant Current
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
OsramOutput Voltage
38 → 120V
Maximum Output Power
45W
Output Current
100 mA, 700 mA
Input Voltage
195 → 264 V
Operation
Constant Current
AC or DC Input Voltage
AC
IP Rating
IP20
Series
OPTOTRONIC OT
Voltage Rating
195 → 264V
Λεπτομέρειες Προϊόντος
OPTOTRONIC 700mA Constant Current LED Drivers with LEDset Interface
These constant current OPTOTRONIC LED drivers from Osram, are fully variable between 100 and 700mA to drive any LED module or OLED panel (such as stock no. 727-2413), by simple potential divider network or potentiometer. Alternatively, for Osram LEDset LED modules, a simple cable between the driver and the LED module will automatically set the correct drive current. The LEDset input terminal on the OPTOTRONIC LED driver can also be used to utilise feedback from thermal or ambient light sensors to vary the drive current and therefore the light output of the modules automatically.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
P.O.A.
1
P.O.A.
1
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
OsramOutput Voltage
38 → 120V
Maximum Output Power
45W
Output Current
100 mA, 700 mA
Input Voltage
195 → 264 V
Operation
Constant Current
AC or DC Input Voltage
AC
IP Rating
IP20
Series
OPTOTRONIC OT
Voltage Rating
195 → 264V
Λεπτομέρειες Προϊόντος
OPTOTRONIC 700mA Constant Current LED Drivers with LEDset Interface
These constant current OPTOTRONIC LED drivers from Osram, are fully variable between 100 and 700mA to drive any LED module or OLED panel (such as stock no. 727-2413), by simple potential divider network or potentiometer. Alternatively, for Osram LEDset LED modules, a simple cable between the driver and the LED module will automatically set the correct drive current. The LEDset input terminal on the OPTOTRONIC LED driver can also be used to utilise feedback from thermal or ambient light sensors to vary the drive current and therefore the light output of the modules automatically.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products