Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
ParkerConnector A
Tube 8
Hydraulic Fitting Type
Hydraulic Blanking Plug
Material
Steel
Finish
Zinc Plated
Connector A - Thread Standard
Metric
Maximum Operating Pressure
500bar
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+100°C
Χώρα Προέλευσης
Poland
Λεπτομέρειες Προϊόντος
Blanking Cap
Female parallel thread blanking cap. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to +120°C for plugs).
Warning
Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 4,01
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 4,97
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 4,01
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 4,97
Μονάδας (Including VAT) Με Φ.Π.Α
1
Αγοράστε μαζικά
Quantity Ποσότητα | Τιμή μονάδας |
---|---|
1 - 4 | € 4,01 |
5 - 9 | € 3,83 |
10+ | € 3,78 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
ParkerConnector A
Tube 8
Hydraulic Fitting Type
Hydraulic Blanking Plug
Material
Steel
Finish
Zinc Plated
Connector A - Thread Standard
Metric
Maximum Operating Pressure
500bar
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+100°C
Χώρα Προέλευσης
Poland
Λεπτομέρειες Προϊόντος
Blanking Cap
Female parallel thread blanking cap. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to +120°C for plugs).
Warning
Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.