Phoenix Contact 3210156 PT 2.5-MT Series Grey, 0.14 → 4mm², Single-Level, Push In Termination
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Phoenix ContactColour
Grey
Number of Levels
Single
American Wire Gauge
26 → 12AWG
Series
PT 2.5-MT
Termination Method
Push In
Cable CSA
0.14 → 4mm²
Voltage Rating
400 V
Current Rating
20A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
EAC
Model Number
PT 2,5-MT
Distrelec Product Id
30401216
Χώρα Προέλευσης
Poland
Λεπτομέρειες Προϊόντος
Knife Disconnect Terminal Blocks MT/TG
Phoenix Contact brings you a great feed-through terminal block with knife disconnect option with PT Push-In technology. The integrated double function shaft located on the one side of the disconnect point and the integrated test contact on the other side provide for comfortable testing.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
€ 45,40
€ 4,54 Μονάδας (Σε ένα πακέτο των 10) (Exc. Vat)Χωρίς Φ.Π.Α
€ 56,30
€ 5,63 Μονάδας (Σε ένα πακέτο των 10) Με Φ.Π.Α
10
€ 45,40
€ 4,54 Μονάδας (Σε ένα πακέτο των 10) (Exc. Vat)Χωρίς Φ.Π.Α
€ 56,30
€ 5,63 Μονάδας (Σε ένα πακέτο των 10) Με Φ.Π.Α
10
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Phoenix ContactColour
Grey
Number of Levels
Single
American Wire Gauge
26 → 12AWG
Series
PT 2.5-MT
Termination Method
Push In
Cable CSA
0.14 → 4mm²
Voltage Rating
400 V
Current Rating
20A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
EAC
Model Number
PT 2,5-MT
Distrelec Product Id
30401216
Χώρα Προέλευσης
Poland
Λεπτομέρειες Προϊόντος
Knife Disconnect Terminal Blocks MT/TG
Phoenix Contact brings you a great feed-through terminal block with knife disconnect option with PT Push-In technology. The integrated double function shaft located on the one side of the disconnect point and the integrated test contact on the other side provide for comfortable testing.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.