Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
pico TechnologyProduct Type
Oscilloscope Probe
Probe Type
Differential
Bandwidth
100MHz
Maximum Common Mode Input Voltage
700V
Connector Type
BNC
Model Number
TA043
Number of Probes
2
Safety Category Level
CAT III
Safety Category Voltage
1000V
Series
TA
Rise Time
3.5ns
Standards/Approvals
IEC 1010.2 031, IEC 1010.1
Χώρα Προέλευσης
Taiwan, Province Of China
Λεπτομέρειες Προϊόντος
The Pico Technology TA043 oscilloscope probe is an active differential probe, suitable for high common-mode voltage measurement applications up to ±700V. It can be used with a signal speed of up to 100MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.
By selecting attenuation ratio 1:10, this oscilloscope probe can measure signals below 70V to get higher resolution and less noise. Otherwise, set the attenuation to 1:100.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 1.174,64
€ 1.174,64 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 1.456,55
€ 1.456,55 Μονάδας Με Φ.Π.Α
1
€ 1.174,64
€ 1.174,64 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 1.456,55
€ 1.456,55 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
pico TechnologyProduct Type
Oscilloscope Probe
Probe Type
Differential
Bandwidth
100MHz
Maximum Common Mode Input Voltage
700V
Connector Type
BNC
Model Number
TA043
Number of Probes
2
Safety Category Level
CAT III
Safety Category Voltage
1000V
Series
TA
Rise Time
3.5ns
Standards/Approvals
IEC 1010.2 031, IEC 1010.1
Χώρα Προέλευσης
Taiwan, Province Of China
Λεπτομέρειες Προϊόντος
The Pico Technology TA043 oscilloscope probe is an active differential probe, suitable for high common-mode voltage measurement applications up to ±700V. It can be used with a signal speed of up to 100MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.
By selecting attenuation ratio 1:10, this oscilloscope probe can measure signals below 70V to get higher resolution and less noise. Otherwise, set the attenuation to 1:100.
