Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
pico TechnologyProduct Type
Oscilloscope Probe
Probe Type
Differential
Attenuation
1:100, 1:1000
Bandwidth
70MHz
Maximum Common Mode Input Voltage
5kV
Connector Type
BNC
Model Number
TA044
Number of Probes
2
Safety Category Level
CAT I
Safety Category Voltage
2.5kV
Series
TA
Rise Time
5ns
Standards/Approvals
IEC 1010-2-031
Χώρα Προέλευσης
Taiwan, Province Of China
Λεπτομέρειες Προϊόντος
The Pico Technology TA044 oscilloscope probe is an active differential probe, suitable for high common-mode voltage measurement applications up to ±7000V. It can be used with a signal speed of up to 70Hz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.
By selecting attenuation ratio 1:100, this oscilloscope probe can measure signals below 70V to get higher resolution and less noise. Otherwise, set the attenuation to 1:1000.
The spring hooks supplied with this probe are rated at 1000 V.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 1.615,88
€ 1.615,88 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 2.003,69
€ 2.003,69 Μονάδας Με Φ.Π.Α
1
€ 1.615,88
€ 1.615,88 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 2.003,69
€ 2.003,69 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
pico TechnologyProduct Type
Oscilloscope Probe
Probe Type
Differential
Attenuation
1:100, 1:1000
Bandwidth
70MHz
Maximum Common Mode Input Voltage
5kV
Connector Type
BNC
Model Number
TA044
Number of Probes
2
Safety Category Level
CAT I
Safety Category Voltage
2.5kV
Series
TA
Rise Time
5ns
Standards/Approvals
IEC 1010-2-031
Χώρα Προέλευσης
Taiwan, Province Of China
Λεπτομέρειες Προϊόντος
The Pico Technology TA044 oscilloscope probe is an active differential probe, suitable for high common-mode voltage measurement applications up to ±7000V. It can be used with a signal speed of up to 70Hz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.
By selecting attenuation ratio 1:100, this oscilloscope probe can measure signals below 70V to get higher resolution and less noise. Otherwise, set the attenuation to 1:1000.
The spring hooks supplied with this probe are rated at 1000 V.
