Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
PR ElectronicsNumber of Channels
2
Module Type
Repeater power supply
Barrier Type
Galvanic Barrier
Output Signal Type
Current, Voltage
Input Signal Type
Current, Voltage
Supply Voltage
19.2 → 300 V dc, 21.6 → 253V ac
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Safety Current Maximum
400mA
Safety Voltage Maximum
250 V ac
Series
5104A
Operating Temperature Range
-20 → +60°C
Χώρα Προέλευσης
Denmark
Λεπτομέρειες Προϊόντος
PR Electronics 5104A Repeater/ Power Supply
PR Electronics 5104A repeater is a power supply and signal isolator for 2-wire transmitters. The 5104A signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.
PR Electronics DIN Rail Mounting
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
P.O.A.
1
P.O.A.
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
PR ElectronicsNumber of Channels
2
Module Type
Repeater power supply
Barrier Type
Galvanic Barrier
Output Signal Type
Current, Voltage
Input Signal Type
Current, Voltage
Supply Voltage
19.2 → 300 V dc, 21.6 → 253V ac
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Safety Current Maximum
400mA
Safety Voltage Maximum
250 V ac
Series
5104A
Operating Temperature Range
-20 → +60°C
Χώρα Προέλευσης
Denmark
Λεπτομέρειες Προϊόντος
PR Electronics 5104A Repeater/ Power Supply
PR Electronics 5104A repeater is a power supply and signal isolator for 2-wire transmitters. The 5104A signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.