Reliance 16bar Anti-Vacuum Valve With Male BSP 1/2 in BSP Male Connection
Τεχνικό φυλλάδιο
Προδιαγραφές
Connection
1/2 in BSP Male
Maximum Set Pressure
16bar
Maximum Temperature
+99°C
For Use With
Hot Water
Body Material
Brass
Connection Gender
Male
Thread Size
1/2in
Thread Standard or Connection Type
BSP
Χώρα Προέλευσης
Australia
Λεπτομέρειες Προϊόντος
Automatic Anti-Vacuum Valve
Automatic Anti-Vacuum Valve for use with hot water heaters to prevent a vacuum forming in installations where there is the potential of the draw off rate exceeding the rate of flow to the inlet; this can occur in properties with multiple outlets below the base of the hot water heater. The valve contains a check cartridge which under normal conditions is held closed by the system pressure. When a vacuum condition exists, the suction will cause the check cartridge to open and air to flow through, equalising the pressure within the hot water heater
Approvals
WRAS
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 57,14
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 70,85
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 57,14
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 70,85
Μονάδας (Including VAT) Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 57,14 |
| 5 - 9 | € 56,23 |
| 10+ | € 55,25 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Connection
1/2 in BSP Male
Maximum Set Pressure
16bar
Maximum Temperature
+99°C
For Use With
Hot Water
Body Material
Brass
Connection Gender
Male
Thread Size
1/2in
Thread Standard or Connection Type
BSP
Χώρα Προέλευσης
Australia
Λεπτομέρειες Προϊόντος
Automatic Anti-Vacuum Valve
Automatic Anti-Vacuum Valve for use with hot water heaters to prevent a vacuum forming in installations where there is the potential of the draw off rate exceeding the rate of flow to the inlet; this can occur in properties with multiple outlets below the base of the hot water heater. The valve contains a check cartridge which under normal conditions is held closed by the system pressure. When a vacuum condition exists, the suction will cause the check cartridge to open and air to flow through, equalising the pressure within the hot water heater
Approvals
WRAS