Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Renesas ElectronicsProduct Type
Motor Driver IC
Motor Type
Brushed DC Motor
Configuration
Dual Full-Bridge Driver
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage Vceo
46V
Mount Type
Through Hole
Package Type
Multiwatt
Output Current
2A
Pin Count
15
Minimum Supply Voltage
4.8V
Maximum Supply Voltage
46V
Minimum Operating Temperature
-25°C
Typical Switching Frequency
40kHz
Maximum Operating Temperature
130°C
Width
5 mm
Series
L298
Height
10.7mm
Length
19.6mm
Standards/Approvals
No
Inverter Power Rating
25W
Supply Current
70mA
Automotive Standard
No
Λεπτομέρειες Προϊόντος
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Motor Controllers & Drivers, STMicroelectronics
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 372,50
€ 14,90 Μονάδας (Σε μία ράγα των 25) (Exc. Vat)Χωρίς Φ.Π.Α
€ 461,90
€ 18,476 Μονάδας (Σε μία ράγα των 25) Με Φ.Π.Α
25
€ 372,50
€ 14,90 Μονάδας (Σε μία ράγα των 25) (Exc. Vat)Χωρίς Φ.Π.Α
€ 461,90
€ 18,476 Μονάδας (Σε μία ράγα των 25) Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
25
| Quantity Ποσότητα | Τιμή μονάδας | Per Ράγα |
|---|---|---|
| 25 - 25 | € 14,90 | € 372,50 |
| 50 - 75 | € 14,57 | € 364,25 |
| 100 - 225 | € 13,97 | € 349,25 |
| 250+ | € 13,42 | € 335,50 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Renesas ElectronicsProduct Type
Motor Driver IC
Motor Type
Brushed DC Motor
Configuration
Dual Full-Bridge Driver
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage Vceo
46V
Mount Type
Through Hole
Package Type
Multiwatt
Output Current
2A
Pin Count
15
Minimum Supply Voltage
4.8V
Maximum Supply Voltage
46V
Minimum Operating Temperature
-25°C
Typical Switching Frequency
40kHz
Maximum Operating Temperature
130°C
Width
5 mm
Series
L298
Height
10.7mm
Length
19.6mm
Standards/Approvals
No
Inverter Power Rating
25W
Supply Current
70mA
Automotive Standard
No
Λεπτομέρειες Προϊόντος
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.


