Renesas, Emulator for RX600 Series

Κωδικός Προϊόντος της RS: 767-6373Κατασκευαστής: Renesas ElectronicsΚωδικός Κατασκευαστή: R0E000010KCE00
brand-logo
View all in Chip Programmers

Τεχνικό φυλλάδιο

Προδιαγραφές

Brand

Renesas Electronics

Accessory Type

Emulator

For Use With

RX600 Series

Interface

I2C

Λεπτομέρειες Προϊόντος

Renesas E1 Emulator

The Renesas E1 Emulator is an on-chip debugging emulator with built-in flash programmer. It is the perfect tool to help develop a system that is based around Renesas microcontrollers (MCUs). The E1 Emulator is designed for basic debugging of the main range of Renesas MCUs. On-board programming is also supported. A list of the compatible MCU series can be found below.
The E1 emulator sits between the PC (via USB cable) and the User’s system (via interface cable). There is also a range of products which allow you to extend the functionality of your E1 Emulator.

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Παρακαλούμε ελέγξτε ξανά αργότερα.

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

P.O.A.

Renesas, Emulator for RX600 Series

1

Διατίθεται σε πολλαπλάσια από 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

Renesas, Emulator for RX600 Series
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

1

Διατίθεται σε πολλαπλάσια από 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Τεχνικό φυλλάδιο

Προδιαγραφές

Brand

Renesas Electronics

Accessory Type

Emulator

For Use With

RX600 Series

Interface

I2C

Λεπτομέρειες Προϊόντος

Renesas E1 Emulator

The Renesas E1 Emulator is an on-chip debugging emulator with built-in flash programmer. It is the perfect tool to help develop a system that is based around Renesas microcontrollers (MCUs). The E1 Emulator is designed for basic debugging of the main range of Renesas MCUs. On-board programming is also supported. A list of the compatible MCU series can be found below.
The E1 emulator sits between the PC (via USB cable) and the User’s system (via interface cable). There is also a range of products which allow you to extend the functionality of your E1 Emulator.