RS PRO 9100 Series Signal Conditioner, Current Input, Relay Output, 10V dc, 30 V dc Supply
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProProduct Type
Signal Conditioner
Input Signal Type
Current
Output Signal Type
Relay
Input Range
4 to 20 mA
Output Range
4 to 20 mA
Supply Voltage
10, 30V dc
Hazardous Area Certification
No
Mount Type
DIN Rail
Terminal Type
Screw
Maximum Operating Temperature
50°C
Minimum Operating Temperature
0°C
Signal Conditioner Type
Amplifier
Standards/Approvals
No
Series
9100
Number of Channels
1
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
24Vdc Trip Amplifiers, Signal Isolator/Converters
Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above (high trip) or below (low trip) the set point, and that the relay can be either normally energised to de-energise in the alarm condition (fail-safe), or normally de-energised to energise in the alarm condition (non fail-safe).,signal Isolators/converter; this unit conditions the signal before sending it through an opto-isolated hybrid circuit. Input and output stages are power from separate secondaries of the dc/dc inverter to provide 3 port isolation
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 358,84
€ 358,84 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 444,96
€ 444,96 Μονάδας Με Φ.Π.Α
1
€ 358,84
€ 358,84 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 444,96
€ 444,96 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProProduct Type
Signal Conditioner
Input Signal Type
Current
Output Signal Type
Relay
Input Range
4 to 20 mA
Output Range
4 to 20 mA
Supply Voltage
10, 30V dc
Hazardous Area Certification
No
Mount Type
DIN Rail
Terminal Type
Screw
Maximum Operating Temperature
50°C
Minimum Operating Temperature
0°C
Signal Conditioner Type
Amplifier
Standards/Approvals
No
Series
9100
Number of Channels
1
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
24Vdc Trip Amplifiers, Signal Isolator/Converters
Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above (high trip) or below (low trip) the set point, and that the relay can be either normally energised to de-energise in the alarm condition (fail-safe), or normally de-energised to energise in the alarm condition (non fail-safe).,signal Isolators/converter; this unit conditions the signal before sending it through an opto-isolated hybrid circuit. Input and output stages are power from separate secondaries of the dc/dc inverter to provide 3 port isolation