RS PRO Blue Polyethylene Solder Sleeve 35.5mm Length 11.5 mm Cable Diameter 5.8 mm Cable Diameter
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProProduct Type
Solder Sleeve
Sub Type
Low Temperature Solder Sleeve
Sleeve Length
35.5mm
Material
Polyethylene
Dielectric Strength
1kV
Voltage
300 V
Minimum Cable Diameter
5.8mm
Maximum Cable Diameter
11.5mm
Colour
Blue
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
RoHS Compliant
Shrink Temperature
115°C
Series
GAST
Χώρα Προέλευσης
China
Λεπτομέρειες Προϊόντος
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 50,33
€ 50,33 1 Σακούλα των 25 (Exc. Vat)Χωρίς Φ.Π.Α
€ 62,41
€ 62,41 1 Σακούλα των 25 Με Φ.Π.Α
1
€ 50,33
€ 50,33 1 Σακούλα των 25 (Exc. Vat)Χωρίς Φ.Π.Α
€ 62,41
€ 62,41 1 Σακούλα των 25 Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProProduct Type
Solder Sleeve
Sub Type
Low Temperature Solder Sleeve
Sleeve Length
35.5mm
Material
Polyethylene
Dielectric Strength
1kV
Voltage
300 V
Minimum Cable Diameter
5.8mm
Maximum Cable Diameter
11.5mm
Colour
Blue
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
RoHS Compliant
Shrink Temperature
115°C
Series
GAST
Χώρα Προέλευσης
China
Λεπτομέρειες Προϊόντος
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.