RS PRO E10 Indicator Light, Clear, 6 V, 60 mA, 10000h
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProVoltage Rating
6 V
Lamp Base
E10
Current Rating
60 mA
Diameter
11.5mm
Lamp Size
G3 1/2
Length
25 mm
Lens Colour
Clear
Luminosity
1 lm
Life Hours
10000h
Χώρα Προέλευσης
Korea, Republic Of
Λεπτομέρειες Προϊόντος
G-3 (11mm) Round MES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 12,80
1 Πακέτο των 10 (Exc. Vat)Χωρίς Φ.Π.Α
€ 15,87
1 Πακέτο των 10 (Including VAT) Με Φ.Π.Α
1
€ 12,80
1 Πακέτο των 10 (Exc. Vat)Χωρίς Φ.Π.Α
€ 15,87
1 Πακέτο των 10 (Including VAT) Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 9 | € 12,80 |
| 10 - 49 | € 11,67 |
| 50 - 99 | € 9,91 |
| 100+ | € 9,35 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProVoltage Rating
6 V
Lamp Base
E10
Current Rating
60 mA
Diameter
11.5mm
Lamp Size
G3 1/2
Length
25 mm
Lens Colour
Clear
Luminosity
1 lm
Life Hours
10000h
Χώρα Προέλευσης
Korea, Republic Of
Λεπτομέρειες Προϊόντος
G-3 (11mm) Round MES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.