RS PRO Non-Contact Voltage Indicator, 230 V ac to 1000 V ac
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProProduct Type
Non-Contact Voltage Indicator
Indicator Type
Voltage
Battery Type
AAA
Standards/Approvals
No
Power Source
Battery
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
40°C
Maximum Detection Voltage
1000V ac
Length
151mm
Diameter
18 mm
Weight
50g
Hazardous Area Certification
ATEX, IECEx
Minimum Detection Voltage
230V ac
Calibrated
RSCAL
Safety Category Level
CAT III
Safety Category Voltage
1000V ac
Χώρα Προέλευσης
Denmark
Λεπτομέρειες Προϊόντος
RS Pro Volt Stick Non-Contact Voltage Detector
The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic tip to any connection point or move it along an insulated cable. When an AC voltage is detected a red indicator in the plastic tip illuminates, as it detects the live wire through the insulation. Note that if a 3 phase machine is connected up and one of the fuses blows, the voltage is conducted back to the defective fuse the other way and a faulty indication may be given. Make sure that all machines are disconnected before testing. The VoltStick® cannot be used on socket with shielded cable.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 189,01
€ 189,01 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 234,37
€ 234,37 Μονάδας Με Φ.Π.Α
Calibration type
RS Calibration
1
€ 189,01
€ 189,01 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 234,37
€ 234,37 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Calibration type
RS Calibration
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProProduct Type
Non-Contact Voltage Indicator
Indicator Type
Voltage
Battery Type
AAA
Standards/Approvals
No
Power Source
Battery
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
40°C
Maximum Detection Voltage
1000V ac
Length
151mm
Diameter
18 mm
Weight
50g
Hazardous Area Certification
ATEX, IECEx
Minimum Detection Voltage
230V ac
Calibrated
RSCAL
Safety Category Level
CAT III
Safety Category Voltage
1000V ac
Χώρα Προέλευσης
Denmark
Λεπτομέρειες Προϊόντος
RS Pro Volt Stick Non-Contact Voltage Detector
The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic tip to any connection point or move it along an insulated cable. When an AC voltage is detected a red indicator in the plastic tip illuminates, as it detects the live wire through the insulation. Note that if a 3 phase machine is connected up and one of the fuses blows, the voltage is conducted back to the defective fuse the other way and a faulty indication may be given. Make sure that all machines are disconnected before testing. The VoltStick® cannot be used on socket with shielded cable.