Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProMaximum Pressure Measurement
10bar
Product Type
Pressure Switch
Minimum Pressure Measurement
0bar
Accuracy
0.5 %
Analogue Output
4 to 20 mA
Maximum Supply Voltage
30V dc
Standards/Approvals
EAC
Housing Material
Stainless Steel
Maximum Operating Temperature
125°C
Mount Type
Flush
IP Rating
IP67
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
This robust pressure switch from the trusted RS PRO range is made to measure pressures of 0 bar to 10 bar in liquid and gaseous media. It's suitable for use in various industrial applications, like in the medical, aviation, automotive and marine fields.
The product uses a piezo-resistive strain gauge sensor, which converts pressure into a linearly-proportional analogue electrical signal of between 4 mA and 20 mA. It's enclosed within a stainless steel housing and has an operational temperature range of -20°C to +125°C. There's a 1/4-inch threaded connector to attach to a panel or housing so the sensor comes into contact with the medium.
Electrical connections to the switch are made using a four-pin M12 connector. The sensor is powered by a DC voltage of between 10 V and 30 V, so it can use a number of different power sources.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 270,14
€ 270,14 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 334,97
€ 334,97 Μονάδας Με Φ.Π.Α
1
€ 270,14
€ 270,14 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 334,97
€ 334,97 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProMaximum Pressure Measurement
10bar
Product Type
Pressure Switch
Minimum Pressure Measurement
0bar
Accuracy
0.5 %
Analogue Output
4 to 20 mA
Maximum Supply Voltage
30V dc
Standards/Approvals
EAC
Housing Material
Stainless Steel
Maximum Operating Temperature
125°C
Mount Type
Flush
IP Rating
IP67
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
This robust pressure switch from the trusted RS PRO range is made to measure pressures of 0 bar to 10 bar in liquid and gaseous media. It's suitable for use in various industrial applications, like in the medical, aviation, automotive and marine fields.
The product uses a piezo-resistive strain gauge sensor, which converts pressure into a linearly-proportional analogue electrical signal of between 4 mA and 20 mA. It's enclosed within a stainless steel housing and has an operational temperature range of -20°C to +125°C. There's a 1/4-inch threaded connector to attach to a panel or housing so the sensor comes into contact with the medium.
Electrical connections to the switch are made using a four-pin M12 connector. The sensor is powered by a DC voltage of between 10 V and 30 V, so it can use a number of different power sources.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
