RS PRO Process Pump Controller for Brushless Micropump, 28V, 6 V
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProCompatible Pump Type
Brushless Micropump
Product Type
Process Pump Controller
Supply Voltage
28, 6V
IP Rating
IP20
Maximum Output Pressure
10bar
Standards/Approvals
No
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
Brushless Micro Pump Controller
A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 128,30
€ 128,30 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 159,09
€ 159,09 Μονάδας Με Φ.Π.Α
1
€ 128,30
€ 128,30 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 159,09
€ 159,09 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProCompatible Pump Type
Brushless Micropump
Product Type
Process Pump Controller
Supply Voltage
28, 6V
IP Rating
IP20
Maximum Output Pressure
10bar
Standards/Approvals
No
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
Brushless Micro Pump Controller
A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.