Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProProduct Type
Terminal Block
Colour
Clear
Sub Type
Single-Pole Indirect Clamping
Voltage
450V
Minimum Wire Size AWG
10AWG
Cable CSA
35mm²
Maximum Wire Size AWG
2AWG
Terminal Block Current
170A
Minimum Operating Temperature
85°C
Termination Type
Screw
Maximum Operating Temperature
85°C
Hazardous Area Certification
No
Standards/Approvals
Lloyds, CE, IMQ
Χώρα Προέλευσης
Italy
Λεπτομέρειες Προϊόντος
The RS PRO connector is made to protect your electrical system against both overcurrent and short-circuiting.
Each pole of the terminal is bridged internally by a copper busbar that provides low resistance for your connection route. The connector has a single plug with strain relief, along with three receptacles. It also has a voltage rating of 450 V and a current rating of 170 A for your electrical connection.
Found in a spectrum of settings for fused and non-fused electrical applications, this type of connector is used for energy management, power supplies and air conditioning controls. Its perfect for panel boards or junction boxes, providing excellent insulation for your current.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
IEC 898-1; IEC 998-2-1
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 90,21
€ 30,07 Μονάδας (Σε ένα πακέτο των 3) (Exc. Vat)Χωρίς Φ.Π.Α
€ 111,86
€ 37,287 Μονάδας (Σε ένα πακέτο των 3) Με Φ.Π.Α
3
€ 90,21
€ 30,07 Μονάδας (Σε ένα πακέτο των 3) (Exc. Vat)Χωρίς Φ.Π.Α
€ 111,86
€ 37,287 Μονάδας (Σε ένα πακέτο των 3) Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
3
| Quantity Ποσότητα | Τιμή μονάδας | Per Πακέτο |
|---|---|---|
| 3 - 87 | € 30,07 | € 90,21 |
| 90 - 177 | € 29,00 | € 87,00 |
| 180+ | € 27,88 | € 83,64 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProProduct Type
Terminal Block
Colour
Clear
Sub Type
Single-Pole Indirect Clamping
Voltage
450V
Minimum Wire Size AWG
10AWG
Cable CSA
35mm²
Maximum Wire Size AWG
2AWG
Terminal Block Current
170A
Minimum Operating Temperature
85°C
Termination Type
Screw
Maximum Operating Temperature
85°C
Hazardous Area Certification
No
Standards/Approvals
Lloyds, CE, IMQ
Χώρα Προέλευσης
Italy
Λεπτομέρειες Προϊόντος
The RS PRO connector is made to protect your electrical system against both overcurrent and short-circuiting.
Each pole of the terminal is bridged internally by a copper busbar that provides low resistance for your connection route. The connector has a single plug with strain relief, along with three receptacles. It also has a voltage rating of 450 V and a current rating of 170 A for your electrical connection.
Found in a spectrum of settings for fused and non-fused electrical applications, this type of connector is used for energy management, power supplies and air conditioning controls. Its perfect for panel boards or junction boxes, providing excellent insulation for your current.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
IEC 898-1; IEC 998-2-1
