RS PRO Thermal Interface Pad, 0.127mm Thick, 2.5W/m·K, 101 x 72.5mm
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProDimensions
101 x 72.5mm
Thickness
0.127mm
Length
101mm
Width
72.5mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Colour
Grey
Operating Temperature Range
-45 → +125 °C
PRICED TO CLEAR
Yes
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
P.O.A.
Μονάδας (Σε ένα πακέτο των 10) (Exc. Vat)Χωρίς Φ.Π.Α
10
P.O.A.
Μονάδας (Σε ένα πακέτο των 10) (Exc. Vat)Χωρίς Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
10
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProDimensions
101 x 72.5mm
Thickness
0.127mm
Length
101mm
Width
72.5mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Colour
Grey
Operating Temperature Range
-45 → +125 °C
PRICED TO CLEAR
Yes
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.