RS PRO Thermal Interface Sheet, 0.2mm Thick, 2.5W/m·K, 150 x 150mm
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProDimensions
150 x 150mm
Thickness
0.2mm
Length
150mm
Width
150mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Colour
Grey
Operating Temperature Range
-45 → +125 °C
Χώρα Προέλευσης
Taiwan, Province Of China
Λεπτομέρειες Προϊόντος
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
€ 45,00
€ 45,00 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 55,80
€ 55,80 Μονάδας Με Φ.Π.Α
1
€ 45,00
€ 45,00 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 55,80
€ 55,80 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 9 | € 45,00 |
| 10 - 24 | € 42,03 |
| 25 - 49 | € 40,83 |
| 50+ | € 40,02 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProDimensions
150 x 150mm
Thickness
0.2mm
Length
150mm
Width
150mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Colour
Grey
Operating Temperature Range
-45 → +125 °C
Χώρα Προέλευσης
Taiwan, Province Of China
Λεπτομέρειες Προϊόντος
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.