Ruland Beam Coupling, 25mm Outside Diameter, 6mm Bore, 24mm Length Coupler
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RulandCoupling Types
Beam Coupling
Bore
6mm
Outside Diameter
25mm
Length
24mm
Torque Rating
3.42Nm
Misalignment - Angular
3°
Misalignment - Parallel
0.38mm
Misalignment - Axial
0.25mm
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
Stainless Steel Flexible Shaft Couplings
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.Two fixing styles available:,Typical applications include encoders, stepper motors, robotics, measuring instruments, servo systems, pumps, valves, fans etc., (i) Set Screw style is secured using one grub-screw per shaft (staggered at 120°) , (ii) Clamp style fixing uses one socket head cap screw per shaft.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 107,83
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 133,71
Μονάδας Με Φ.Π.Α
1
€ 107,83
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 133,71
Μονάδας Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 107,83 |
| 5 - 9 | € 105,11 |
| 10+ | € 104,48 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RulandCoupling Types
Beam Coupling
Bore
6mm
Outside Diameter
25mm
Length
24mm
Torque Rating
3.42Nm
Misalignment - Angular
3°
Misalignment - Parallel
0.38mm
Misalignment - Axial
0.25mm
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
Stainless Steel Flexible Shaft Couplings
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.Two fixing styles available:,Typical applications include encoders, stepper motors, robotics, measuring instruments, servo systems, pumps, valves, fans etc., (i) Set Screw style is secured using one grub-screw per shaft (staggered at 120°) , (ii) Clamp style fixing uses one socket head cap screw per shaft.